Commands

These commands are used for repeaters. See github for the full list of commands or https://docs.meshcore.io/cli_commands/

Command	Usage	Example
jail
tempradio	tempradio <freq>,<bw>,<sf>,<cr>,<timeout_mins>	`tempradio 915.075,125,9,5,120`

Repeater CLI Commands:

Info:
  ver                 - Firmware version
  board               - Board name
  clock               - Show current time

Stats:
  stats-core          - Core stats (uptime, battery, queue)
  stats-radio         - Radio stats (RSSI, SNR, noise floor)
  stats-packets       - Packet statistics (sent/recv counts)
  clear stats         - Reset all statistics

Network:
  neighbors           - Show neighboring repeaters (zero-hop)
  advert              - Send advertisement now

Logging:
  log start           - Enable packet logging
  log stop            - Disable packet logging
  log                 - Dump log file to console
  log erase           - Erase log file

Configuration (get/set):
  get name            - Node name
  get radio           - Radio params (freq,bw,sf,cr)
  get tx              - TX power (dBm)
  get repeat          - Repeat mode on/off
  get public.key      - Node public key
  get advert.interval - Advertisement interval (minutes)
  get owner.info      - Owner information

  set name <name>     - Set node name
  set tx <power>      - Set TX power (dBm)
  set repeat on|off   - Enable/disable repeating
  set radio f,bw,sf,cr - Set radio params (reboot to apply)
  set advert.interval <min> - Set advert interval (60-240 min)
  set owner.info <i>  - Set owner information

Region management:
  region             - display currently configured regions
  region save        - save current region config to flash
  region download    - download regions config from node to file
  region (up)load      - upload regions config to node from file
  region home        - get/set home region
  region get         - get info (and parent) for a region
  region put         - adds or update a region
  region remove      - remove a region definition
  region allowf      - gives flood permission to a region
  region denyf       - remove flood permission to a region
  region list        - list allowed/denied regions

System:
  reboot              - Reboot device
  erase               - Erase filesystem (serial only)
  script <file>       - Execute script