meshcore-cli

Run a trace

meshcli -j -s /dev/ttyUSB0 trace e2,4a,e2
meshcli -j -s /dev/ttyUSB0 trace e260,4aaa,e260

Example:

{
  "tag": 3457783684,
  "auth": 0,
  "flags": 0,
  "path_len": 3,
  "path": [
    {
      "hash": "e2",
      "snr": 6.0
    },
    {
      "hash": "4a",
      "snr": -1.5
    },
    {
      "hash": "e2",
      "snr": 4.0
    },
    {
      "snr": 5.75
    }
  ]
}

{
  "tag": 4020427322,
  "auth": 0,
  "flags": 1,
  "path_len": 3,
  "path": [
    {
      "hash": "e260",
      "snr": 6.75
    },
    {
      "hash": "4aaa",
      "snr": -3.75
    },
    {
      "hash": "e260",
      "snr": 2.75
    },
    {
      "snr": 5.75
    }
  ]
}

node_discover

This command can be used to discover nearby nodes.

$ meshcli -j -s /dev/ttyUSB0 nd | jq

[
  {
    "SNR": 10.5,
    "RSSI": -88,
    "path_len": 0,
    "node_type": 2,
    "SNR_in": 11.0,
    "tag": "a4b73a58",
    "pubkey": "e2601d59151789bd"
  },
  {
    "SNR": 10.75,
    "RSSI": -42,
    "path_len": 0,
    "node_type": 2,
    "SNR_in": 10.25,
    "tag": "a4b73a58",
    "pubkey": "2fd9c7bbc93def5f"
  },
  {
    "SNR": 11.0,
    "RSSI": -81,
    "path_len": 0,
    "node_type": 2,
    "SNR_in": 12.0,
    "tag": "a4b73a58",
    "pubkey": "75ab85174506c320"
  }
]

Node Info

/usr/local/bin/meshcore-cli -j -s /dev/meshcore0 req_status "🦷 Quakers Hill Wold"

If it's connected via USB, you can use the -r flag.

You can pass through repeater commands like this:

meshcli -s /dev/ttyACM0 login "NODE NAME" PASSWD
meshcli -s /dev/ttyACM0 cmd "NODE NAME" "set owner.info NAME"