These commands are used for repeaters. See github for the full list of commands or https://docs.meshcore.io/cli_commands/
| Command | Usage | Example Command | Example Output |
|---|---|---|---|
| tempradio | tempradio |
tempradio 915.075,125,9,5,120 |
Repeater CLI Commands:
Info:
ver - Firmware version
board - Board name
clock - Show current time
Stats:
stats-core - Core stats (uptime, battery, queue)
stats-radio - Radio stats (RSSI, SNR, noise floor)
stats-packets - Packet statistics (sent/recv counts)
clear stats - Reset all statistics
Network:
neighbors - Show neighboring repeaters (zero-hop)
advert - Send advertisement now
Logging:
log start - Enable packet logging
log stop - Disable packet logging
log - Dump log file to console
log erase - Erase log file
Configuration (get/set):
get name - Node name
get radio - Radio params (freq,bw,sf,cr)
get tx - TX power (dBm)
get repeat - Repeat mode on/off
get public.key - Node public key
get advert.interval - Advertisement interval (minutes)
get owner.info - Owner information
set name <name> - Set node name
set tx <power> - Set TX power (dBm)
set repeat on|off - Enable/disable repeating
set radio f,bw,sf,cr - Set radio params (reboot to apply)
set advert.interval <min> - Set advert interval (60-240 min)
set owner.info <i> - Set owner information
Region management:
region - display currently configured regions
region save - save current region config to flash
region download - download regions config from node to file
region (up)load - upload regions config to node from file
region home - get/set home region
region get - get info (and parent) for a region
region put - adds or update a region
region remove - remove a region definition
region allowf - gives flood permission to a region
region denyf - remove flood permission to a region
region list - list allowed/denied regions
System:
reboot - Reboot device
erase - Erase filesystem (serial only)
script <file> - Execute script