Links

Sydney Specific

• nswmesh.au (the primary site for NSW mesh)
• Sydney MeshCore Map
• https://meshsydney.com

Maps

• https://mesh-map.e-l33t.org
• https://corescope.wmcd.net.au:8443/#/live
• https://regions.meshcore.nz
• https://nsw.eastmesh.au
• https://meshsydney.com/#repeater-owners (emoji scoreboard)
• https://corescope.wmcd.net.au:8443/

MeshCore

• MeshCore official site
• MeshCore Flasher
• https://github.com/Mraanderson/meshcore-ota

Settings

These are settings using on other Mesh's

• https://tennmesh.com/settings/
• https://bayareameshcore.org/repeater-setup/

Software

• https://github.com/jkingsman/Remote-Terminal-for-MeshCore

Other useful stuff

• VK3TWO equipment list
• https://cascadiamesh.org/for-property-owners-managers/
• https://github.com/samuk/awesome-meshcore
• https://zindello.com.au/finding-the-sweet-spot-meshcore-lora-settings-in-the-australian-900mhz-band/

Other Meshs

Australia

• Melbourne
• Perth
• Brisbane

US

• WestCoast Mesh
• Bay Area Mesh

stuff to clean up

It’s https://corescope.wmcd.net.au/#/map with display->multi-byte support checked. There’s more info here https://github.com/Kpa-clawbot/CoreScope/issues/689 on how that works and what is/isn’t possible in the underlying firmware

Have you used the Semtech Lora calculator? https://www.semtech.com/design-support/lora-calculator it's great for all the timings and comparing settings. Meshcore is preamble 16/crc on (narrow with the long preamble as currently in dev will be 32)