# Links

## Sydney Specific

* [nswmesh.au](https://nswmesh.au) (the primary site for NSW mesh)
* [Sydney MeshCore Map](https://mesh-map.e-l33t.org)
* https://meshsydney.com

### Maps

* https://mesh-map.e-l33t.org
* https://corescope.wmcd.net.au:8443/#/live
* https://regions.meshcore.nz
* https://nsw.eastmesh.au
* https://meshsydney.com/#repeater-owners (emoji scoreboard)
* https://corescope.wmcd.net.au:8443/

## MeshCore

* [MeshCore](https://meshcore.io/) official site
* [MeshCore Flasher](https://meshcore.io/flasher.html)
* https://github.com/Mraanderson/meshcore-ota

## Settings

These are settings using on other Mesh's

* https://tennmesh.com/settings/
* https://bayareameshcore.org/repeater-setup/

## Software

* https://github.com/jkingsman/Remote-Terminal-for-MeshCore

## Other useful stuff

* [VK3TWO equipment list](https://discordapp.com/channels/1446313890505035900/1459090032643014801/1469636634654806145)
* https://cascadiamesh.org/for-property-owners-managers/
* https://github.com/samuk/awesome-meshcore
* https://zindello.com.au/finding-the-sweet-spot-meshcore-lora-settings-in-the-australian-900mhz-band/

## Other Meshs

### Australia

* [Melbourne](https://eastmesh.au)
* [Perth](https://perth.meshcore.au)
* [Brisbane](https://wiki.mbug.com.au/en/Meshcore/Settings)

### US

* [WestCoast Mesh](https://www.wcmesh.com)
* [Bay Area Mesh](https://bayareameshcore.org/)


## stuff to clean up

It’s https://corescope.wmcd.net.au/#/map with display->multi-byte support checked. There’s more info here https://github.com/Kpa-clawbot/CoreScope/issues/689 on how that works and what is/isn’t possible in the underlying firmware

Have you used the Semtech Lora calculator? https://www.semtech.com/design-support/lora-calculator it's great for all the timings and comparing settings. Meshcore is preamble 16/crc on (narrow with the long preamble as currently in dev will be 32)