Blame
|
1 | # Links |
||||||
| 2 | ||||||||
|
3 | ## Sydney Specific |
||||||
|
4 | |||||||
| 5 | * [nswmesh.au](https://nswmesh.au) (the primary site for NSW mesh) |
|||||||
| 6 | * [Sydney MeshCore Map](https://mesh-map.e-l33t.org) |
|||||||
| 7 | * https://meshsydney.com |
|||||||
| 8 | ||||||||
| 9 | ### Maps |
|||||||
| 10 | ||||||||
|
11 | * https://mesh-map.e-l33t.org |
||||||
|
12 | * https://corescope.wmcd.net.au:8443/#/live |
||||||
|
13 | * https://regions.meshcore.nz |
||||||
|
14 | * https://nsw.eastmesh.au |
||||||
|
15 | * https://meshsydney.com/#repeater-owners (emoji scoreboard) |
||||||
|
16 | * https://corescope.wmcd.net.au:8443/ |
||||||
|
17 | |||||||
| 18 | ## MeshCore |
|||||||
| 19 | ||||||||
|
20 | * [MeshCore](https://meshcore.io/) official site |
||||||
|
21 | * [MeshCore Flasher](https://meshcore.io/flasher.html) |
||||||
|
22 | * https://github.com/Mraanderson/meshcore-ota |
||||||
|
23 | |||||||
|
24 | ## Settings |
||||||
| 25 | ||||||||
| 26 | These are settings using on other Mesh's |
|||||||
| 27 | ||||||||
| 28 | * https://tennmesh.com/settings/ |
|||||||
| 29 | * https://bayareameshcore.org/repeater-setup/ |
|||||||
| 30 | ||||||||
|
31 | ## Software |
||||||
| 32 | ||||||||
| 33 | * https://github.com/jkingsman/Remote-Terminal-for-MeshCore |
|||||||
| 34 | ||||||||
|
35 | ## Other useful stuff |
||||||
| 36 | ||||||||
| 37 | * [VK3TWO equipment list](https://discordapp.com/channels/1446313890505035900/1459090032643014801/1469636634654806145) |
|||||||
|
38 | * https://cascadiamesh.org/for-property-owners-managers/ |
||||||
|
39 | * https://github.com/samuk/awesome-meshcore |
||||||
|
40 | * https://zindello.com.au/finding-the-sweet-spot-meshcore-lora-settings-in-the-australian-900mhz-band/ |
||||||
|
41 | |||||||
| 42 | ## Other Meshs |
|||||||
| 43 | ||||||||
|
44 | ### Australia |
||||||
| 45 | ||||||||
|
46 | * [Melbourne](https://eastmesh.au) |
||||||
| 47 | * [Perth](https://perth.meshcore.au) |
|||||||
|
48 | * [Brisbane](https://wiki.mbug.com.au/en/Meshcore/Settings) |
||||||
|
49 | |||||||
| 50 | ### US |
|||||||
| 51 | ||||||||
| 52 | * [WestCoast Mesh](https://www.wcmesh.com) |
|||||||
| 53 | * [Bay Area Mesh](https://bayareameshcore.org/) |
|||||||
|
54 | |||||||
| 55 | ||||||||
| 56 | ## stuff to clean up |
|||||||
| 57 | ||||||||
| 58 | It’s https://corescope.wmcd.net.au/#/map with display->multi-byte support checked. There’s more info here https://github.com/Kpa-clawbot/CoreScope/issues/689 on how that works and what is/isn’t possible in the underlying firmware |
|||||||
|
59 | |||||||
| 60 | Have you used the Semtech Lora calculator? https://www.semtech.com/design-support/lora-calculator it's great for all the timings and comparing settings. Meshcore is preamble 16/crc on (narrow with the long preamble as currently in dev will be 32) |
|||||||